What do you think of this squishy crochet mouse pattern? Just like a real mouse, it’s cute as heck, but unlike most real mice it’s cuddly too! But my own personal favorite thing is how quickly it comes together in just a few simple shapes.

I’ve made this crochet mouse plush with super bulky chenille yarn, so it’s extra soft and squashy, and big enough for my daughter to enjoy as a toy. But you could make it from lighter weight chenille yarn, and I’ve got notes to help you achieve the best results.

Materials

To make a mouse just like mine, you’ll need:

• Super bulky chenille yarns in light brown and pale pink. I’ve used Cygnet’s Jellybaby yarn in teddy bear, and Hobbii’s Toucan yarn in light pink. You could swap out the light brown yarn for pale gray or even white if you prefer.
• A small quantity of black yarn. I’ve used super bulky chenille again, but you could use almost any black yarn from your stash and double it up if necessary.
• A J-10 (6mm) crochet hook.
• Stitch markers. Or scraps of yarn in a contrasting color.
• ⅝ inch (16mm) safety eyes.
• A darning needle.
• Hi-loft, toy safe stuffing.

To make a smaller mouse, match a lighter weight chenille yarn with a crochet hook one size smaller than the yarn wrapper recommends. Using a small hook produces tight fabric which you can stuff firmly later with out little gaps opening up between the stitches. For the finest yarns, you’ll also need to use smaller safety eyes. Here’s (roughly!) how tall your mouse will turn out using different yarn weights, and what size eyes to use:

Yarn weight	Squishy height (not including the ears)	Safety eye size
DK	4 inches (10cm)	⅜ inch (9mm)
Aran/worsted	5 inches (13cm)	⅜ inch (9mm)
Bulky	6 inches (15cm)	⅝ inch (16mm)
Super Bulky	7 inches (18cm)	⅝ inch (16mm)

Pattern notes

I’ve written this pattern in standard American crochet terms. It uses almost entirely single crochet, with just a small number of longer stitches in the tail. The stitches and their abbreviations I’ve used are:

Ch chain stitch
Sl st slip stitch
Sc single crochet
Sc blo single crochet in the back loop only
Hdc half double crochet
Dc double crochet
Inc increase (make 2 single crochets in the same space)
Dec decrease

For your decreases, use the invisible decrease method:

• Insert your hook into the front loop only of the next two stitches (fig. 1).
• Yarn over and pull through a loop. There are now two loops on the hook.
• Yarn over again, and draw through both loops (fig. 2).

Squishy crochet mouse pattern

This mouse is mostly body. Or giant head, depending on how you look at it! So let’s start there.

Body

Start your mouse’s body with either a magic circle, or by making 4 chain stitches and joining them in a circle with a slip stitch. Either method will work, but I find with fluffy chenilles the 4-ch loop is easier to tighten without snapping the yarn.

• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop, catching the yarn tail under the stitches as you go (8 sts). Gently pull the yarn tail to tighten the hole.
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)
• 4th round: *2 sc, inc* 8 times (32 sts)
• 5th round: *3 sc, inc* 8 times (40 sts)
• Rounds 6 – 23: Sc all the way round
• 24th round: 3 dec, sc 8, 6 dec, 8 sc, 3 dec (28 sts)
• 25th round: 3 dec, sc 2, 6 dec, 2 sc, 3 dec (16 sts)
• Put a stitch marker into the loop on your hook, and cut your yarn leaving a 24 inch tail.

Adding the eyes

Spread the body out flat in front of you. Since the decreases at the bottom of the body are bunched up, it will only lie flat with the decreases at the sides, giving you a distinct front and back.

Insert the safety eyes through the front of the body, about 7 or 8 stitches apart between rows 11 and 12. Obviously the aim is to get them as evenly positioned either side of the center line as possible, but it doesn’t matter if one eye is a stitch out, if it makes the spacing between them more appealing.

When you’re confident with the position of the eyes, press the backs on firmly.

Closing the body

Before you close the body, stuff it firmly with toy safe stuffing. Then put the last stitch from round 25 onto your hook and make one more round:

• 26th round: 8 dec, sl st (8 sts)

Poke in a little more stuffing if it will fix, then thread the remaining yarn tail onto a darning needle and sew the remaining hole closed. It’s not too important how you sew it closed exactly, but for the neatest result, you can’t beat using mattress stitch through the front loops only. The first picture below shows where the stitches go. Then pinch the beginning of the seam firmly with one hand, and pull the yarn tail firmly in the other direction with the other. The join should zip right up!

Adding the face

Here’s where we’re at so far:

To make a cute little button nose, grab your black yarn and start with a either a magic circle or a 3-ch loop (that’s not a typo – 3 chains, not 4!). Into the loop, sc 3, and sl st. Cut the yarn leaving a 12” tail and pull the tail right through the slip stitch.

Position the top of the nose about level with the center of the eyes, and sew it in place. Use the remaining yarn tail to embroider a mouth, then poke what’s left of it inside the body.

Finally, use some of your pink yarn to give your mouse long, translucent-looking whiskers (or skip to the end of the pattern to see how they’d look in white!). I started mine by pushing the darning needle into the back of the body, and right through to the front, at a spot just next to the nose. Then I made three whiskers on either side of the nose, and after the last whisker I pushed the needle right through to the back of the body again – coming out at the same place I went in earlier. Then I knotted the yarn tails together, trimmed them short, and poked the knot inside the body. The stuffing will keep it anchored in place.

The ears

With your pink yarn, make a magic circle or 4-chain loop.

• 1st round: Ch 1, then catching the yarn tail under your stitches, sc 8 into the magic circle or 4-ch loop (8 sts). Gently pull the yarn tail to tighten the center of the ear.
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)

In the first stitch of round 4, change color back to brown:

Insert the hook into the next stitch and draw through a loop of pink yarn.
Pick up the brown yarn and put it over the hook from back to front, then pull a loop of the brown yarn through both pink loops. Cut the pink yarn leaving a 3” tail, and continue with the brown yarn.

• 4th round: *2 sc, inc* 8 times (32 sts)
• Pause and tie the pink and brown yarn ends together, then trim them to about an inch long.
• 5th round: Sc blo all the way round (32 sts)
• 6th round: *2 sc, dec* 8 times (24 sts)
• 7th round: *1 sc, dec* 8 times (16 sts)
• 8th round: 8 dec, sl st (8 sts)

Cut the yarn leaving a 8” yarn tail, and sew the remaining hole closed using the mattress stitch technique above. Repeat the whole process to make a second ear.

Then, using a doubled-up length of brown yarn, sew the ears onto the top of the head. If you have some knitting needles, skewers, or chopsticks to hand, they’re really useful for holding the ears in position while you sew. Just insert them through the top of the ear and right down into the body. I use two for each ear, so the ear can’t spin around.

Tail time

My mouse’s finishing touch is his tail.

1. Using the pink yarn, make a slip knot with a 12” tail for joining to the body later.
2. Ch 18
3. Sk 1, sl st, sc, hdc, dc 14.
4. Cut the yarn leaving an 8” tail. Put the yarn tail onto a darning needle, then thread it through the last loop on your hook, to stop the stitches unravelling.
5. Fold the tail in half lengthways, with the backs of the stitches facing outwards. Whip stitch each of the chain stitches from step 2 to the top of their corresponding stitch in step 3, to make a long tube which tapers to a point at the end.
6. Thread any remaining yarn tail down inside the tail to hide it, then use the yarn tail from step 1 to attach the tail to the body.

Squishy crochet mouse complete

And here it is!

A day or so after finishing my mouse, I decided to see how he’d look with white whiskers instead. I think either works, and my camera really isn’t capturing much difference at all! I do slightly prefer the contrast of the white in real life, but if you don’t already have white and you don’t want to buy a whole ball just for this project, the pink totally works, and the pared back color palette is pretty effective in it’s own way. Here’s pink on the left, and white on the right (you’ll kind of have to take my word for it!)

Whatever fur color and whisker color you chose, and whatever size you make it in, I hope you have lots of fun with this pattern. And don’t forget to make him a cute puppy or adorable frog pal now too!

Happy crocheting!

The post Squishy Crochet Mouse Pattern appeared first on Lucy Kate Crochet.

How cute is this squishy crochet puppy? He’s a fun, beginner-friendly alternative to making a puppy pattern with separate head, body and leg parts. But he’s just as appealing and cuddly!

I’ve made him with bulky chenille yarn to really make him as squashy and irresistible as possible. But the pattern is just as effective in lighter weight and/or smoother yarns, and I’ve got tips for making him in different sizes, as well as lots of photos of the techniques involved.

You’ll need

The materials I used to make this puppy are:

• Super bulky chenille yarn in white and brown. I used Cygnet Jellybaby yarn in the shades white and moose.
• A small quantity of black yarn for the nose and mouth.
• Size J (6mm) crochet hook.
• Stitch markers (or scraps of yarn will do)
• ⅝” (16mm) safety eyes.
• Toy safe stuffing (approx 2oz, or 55g).

My plushy is about 7” tall. If you want to use a lighter weight yarn, you’ll need to choose a smaller crochet hook to match, and your puppy will turn out smaller. I recommend using a hook one size smaller than the yarn wrapper recommends, to create a dense fabric that doesn’t allow the stuffing to peep through.

You’ll also need to use smaller safety eyes with some yarns, to keep the proportions right:

• With dk, aran and worsted yarns, use 12mm eyes. You plushy will turn out 4-5” tall.
• For bulky yarns, 16mm eyes will still work. Your plushy will turn out about 6″ tall.

Squishy crochet puppy pattern

This pattern is written in standard U.S. crochet terms. You’ll only need to know a small number of very basic stitches:

Ch chain
Sl st slip stitch
Sc single crochet
Inc increase (make 2 sc in the same space)
Dec decrease

Round 1

To start, grab your brown yarn and either make a magic circle, or chain 4 and slip stitch into the furthest stitch from the hook to make a loop. If you’re using a fluffy yarn like me, I find a 4-chain loop is easier to tighten later without snapping the yarn.

1st round: Ch 1, and sc 8 into your magic circle or 4-ch loop (8 sts).

Round 2

2nd round: 8 inc (16 sts).

Rounds 3 – 14

Rounds 3 – 15 are worked in a combination of brown and white yarn. You can approach this in a couple of different ways:

1. Cut the yarn every time you change color, then tie the yarn ends together later.
2. Carry the yarn you’re not using behind the yarn you are using. If you choose this option, you’ll need to catch the floating strand of the yarn you’re not using every 4 or 5 stitches. If that’s a technique you haven’t used before, there’s a description of it (with photos) in this article.

I find it’s pretty easy to get away with the first option when I’m using chenille yarns. Their texture holds the stitches in place, so you don’t have to worry about areas of loose tension where the yarn breaks are. But for smooth yarns I’d use the second option.

To change color, insert your hook into the next stitch and draw through a loop of the color you’ve been using (in this case brown – see the left hand photo below). Then loop your new yarn over the hook from back to front, and draw it through both loops on your hook (right hand photo below).

3rd round: With the brown yarn *sc, inc* twice, color change to white yarn, *sc, inc* three times, color change to brown yarn, *sc, inc* three times. (24 sts)

4th round: 2 sc, inc, 2 sc, color change to white yarn, inc, *2 sc, inc* three times, color change to brown yarn, *2 sc, inc* three times. (32 sts)

5th round: 3 sc, inc, sc, color change to white yarn, 2 sc, inc, *3 sc, inc* 3 times, sc, color change to brown yarn, 2 sc, inc, *3 sc, inc* twice. (40 sts)

That’s the last of the increasing rows, so I’m going to layout the pattern for rounds 6 – 15 a little differently, to make it easier for you to keep track of the color changes.

Rounds 6 – 15

Rather than set out this next section in rounds, I’m just going to tell you how many stitches to make before changing color again. Since we’re going round and round in spirals, the point where one round finishes and the next begins isn’t all that important anyway.

Make all the stitches using single crochet. The gaps in the list don’t mean anything – they’re just to break it up and help you keep track of progress!

• 6 brown
• 21 white
• 18 brown
• 22 white
• 19 brown

• 22 white
• 18 brown
• 22 white
• 18 brown
• 23 white

• 18 brown
• 23 white
• 16 brown
• 24 white
• 16 brown

• 25 white
• 14 brown
• 27 white
• 11 brown
• 37 white

You’ve just finished round 15, and your puppy’s brown patch is finished. We’re going back to counting rounds now, so pop a stitch marker or scrap of yarn through the stitch you’ve just made to mark where the rounds end.

Rounds 16 – 23

Rounds 16 – 23: Sc 40 (40 sts)

At the end of round 23 is a good time to add the eyes. Spread the body out on a flat work surface, and position the safety eyes. I placed mine between rows 10 and 11, and 8 stitches apart – but you can experiment with moving them around to change your puppy’s expression!

Press the backs onto the safety eyes, then spread the body out flat again, making sure the eyes are central. The next step is to make single crochets until you reach the spot marked by the blue arrow in the photo above. For me it’s 18 sc, but for you it might be slightly more or less. Ending up in that corner is more important than how many stitches it takes to get there!

Put a stitch marker into your last stitch – this is the new beginning and end point for the final few rounds. Now you’re ready to close the body.

Closing the body

The base of your plushy is going to be elliptical, and we’re going to achieve that by bunching the decreases up at the sides. I recommend using invisible decreases for amigurumi projects, because they’re just that – practically invisible on the right side of your work. If you haven’t tried the invisible decrease before, here’s how it’s done:

• Insert your hook through the front loop only of the next two stitches (fig. 1).
• Yarn over and draw through a loop (two loops remaining on the hook).
• Yarn over and draw through both loops (fig. 2).

Let’s put that to use, and make rounds 24 and 25:

24th round: 3 dec, sc 8, 6 dec, 8 sc, 3 dec (28 sts)
25th round: 3 dec, sc 2, 6 dec, 2 sc, 3 dec (16 sts)

Put a stitch marker through the loop on your hook to hold it, then measure a 24” tail and cut your yarn. Stuff your plushy firmly with toy-safe stuffing, keeping back a little (about half a cup) for the tail later. Then pick up the loop from the stitch marker and make one more round:

26th round: 8 dec, sl st (8 sts)

Poke in a little more stuffing if it will fit, then use the remaining yarn tail to sew the opening shut. The body is done!

Ears

Your puppy’s soft and floppy over-sized ears are going to be his cutest feature. I’ve made both in brown, but one brown and one white or black would be a sweet way of personalizing your project.

• Start with a magic circle or a 4-chain loop.
• 1st round: Ch, 8 sc (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *Sc, inc* 8 times (24 sts)
• Rounds 4 – 7: Sc all the way round (24 sts)
• 8th round: *4 sc, dec* 4 times (20 sts)
• Rounds 9 & 10: Sc all the way round (20 sts)
• 11th round: *3 sc, dec* 4 times (16 sts)
• 12th round: Sc 16, sl st.

Cut the yarn leaving a long tail for sewing later.

Tail

Start the tail with white yarn, and a magic circle or 4-chain loop.

• 1st round: Ch, 8 sc (8 sts)
• 2nd round: *3 sc, inc* twice (10 sts)
• 3rd round: *4 sc, inc* twice (12 sts)

Change color to brown.

• Rounds 4 – 9: Sc all the way round (12 sts)
• 10th round: *4 sc, dec* twice, sl st (10 sts)

Cut the yarn leaving a long tail for sewing later. Lightly stuff the tail up to about round 7.

Nose

The last crochet detail for your puppy is their sweet schnozz. Using your black yarn:

1. Ch 3, sl st into the furthest st from the hook to make a loop.
2. Ch 1, 3 sc into the 3-ch loop.
3. Ch 1, turn your work, 3 sc (into the tops of the single crochets from step 2).
4. Sl st into the ch 1 at the beginning of step 2.

Cut the yarn leaving, you’ve guessed it, a long tail for sewing.

Assembling your puppy

There’s just a few easy steps between you and a finished cuddly puppy now!

Sew the ears onto the sides of the head, level with round 4. They hang more naturally if you just pick up the front loops around the top of the ear rather than the front and back loops.

Next hold your puppy upright on a flat surface to get the position of the tail right. Before you join it to the body, you’ve got a choice to make:

• You can leave the tail to wag freely, in which case you want the color change in the tail facing outwards, so it’s on the underside of the tail when the tail drops down.
• Or you can tie the tail flush to the body like me, in which case you want the color change facing inwards towards the body.

Now sew the base of the tail to the body. If you’re tying the tail flush to the body, thread a 6” piece of yarn onto a darning needle and pass it behind a stitch facing the body on round 5 of the tail. Find the stitch it touches on the body and thread the yarn behind that one too. Tie the ends in a knot, and tuck them inside the body.

Last but not least, sew the nose in place. Then thread 12” of black yarn onto a needle, and run it behind a stitch at the base of the nose (it could be one of the stitches holding the nose in place, or one of the stitches on the body – see left hand photo below). Thread the other end of the black yarn through the eye of the needle too, so you’re working with two strands at once (center photo). Embroider a little mouth, using the stitch-grid in the body as a guide (right hand photo). I can never resist making my amigurumi toys look a little grumpy, but you could give your puppy a smile or a neutral expression.

Squishy Puppy Complete

My daughter has called this one Sandwich! I hope you enjoy making this project as much as I enjoyed developing it, and that whoever receives your plushy loves it as much as my daughter loves Sandwich. If it’s given you the confidence to try a more life-like amigurumi pattern next, you’ll love Lucy’s Poodle and Labrador patterns. Happy crocheting!

The post Squishy Crochet Puppy Pattern appeared first on Lucy Kate Crochet.

Hello and welcome to my squishy crochet parrot pattern! She is more specifically, and I hope obviously, a cute and colorful scarlet macaw. And she’s a really easy amigurumi project to make, for anyone at any skill level.

She’d be a fun gift for a child who loves to play pirates, or a bird-loving grown up. Depending on the yarn you use, she can be big enough to cuddle, or small enough to fit in your palm.

Materials

To make a squishy crochet scarlet macaw of your own, you’ll need:

• Yarns in red, yellow, blue, gray and white. I used Cygnet’s Jellybaby yarn in the shades postbox, ultramarine, pearl gray and white, and Hobbii’s Toucan yarn in mustard. You can obviously adapt the pattern to resemble a different parrot species by using different colors too!
• A crochet hook. Amigurumi looks best when the stitches are tight, so I always use a hook one size smaller than the yarn wrapper recommends.
• Stitch markers. Or scraps of yarn, to help keep track of your rounds.
• Safety eyes. I’m using 16mm safety eyes, but see the next section for notes on choosing the right size.
• Toy stuffing. Such as Polyfil, or whatever your usual go-to filling is.
• A darning needle.

When I took this photo I thought I’d use black yarn to add nostrils at the top of the beak as well. In the end I decided to leave that detail off, but let me know in the comments if you think I shouldn’t have!

Which weight of yarn should you use?

This pattern will work with any weight of yarn, as long as all the yarns you use are the same weight. The yarns I used are all super bulky chenille yarns (approximately 120 yards per 100g). They’re very squashy and tactile, and they make a parrot large enough for my daughter to have as a cuddly toy.

Here’s roughly what you can expect if you choose a different yarn:

• DK yarns make a parrot about 4 inches tall. Swap the eyes for 12mm eyes.
• Worsted (a.k.a. aran) yarns make a parrot about 5 inches tall. Swap the eyes for 12mm eyes.
• Bulky yarns make a parrot about 6 inches tall. Use 16mm eyes.
• And jumbo yarns make a parrot 8 inches tall or more. Swap the eyes for 20 mm eyes.

Pattern notes

My parrot pattern is made entirely in single crochet. The only terms you’ll need to be familiar with in the instructions are:

Ch chain
Sl st slip stitch
Sc single crochet
Inc increase (make 2 sc in the same place)
Dec decrease

To decrease in amigurumi, I recommend using the invisible decrease technique:

• Insert your hook through the front loop only of the next stitch, then through the front loop only of the following stitch too (fig.1). 3 loops on hook.
• Yarn over and draw through two loops. Two loops remaining on hook.
• Yarn over and draw through both remaining loops (fig. 2).

If you get stuck with any of the basics, take a look at Lucy’s guide to getting started with simple crochet techniques here.

Squishy Crochet Parrot Pattern

Right, preliminaries dealt with, let’s dive into the pattern! You parrot will be made up of:

• a body
• wings
• eyes
• and beak.

And last of all, the toes are embroidered on.

The body

Using your red yarn, start with either a magic circle or by making four chains stitches, and slip stitching into the furthest chain from the hook to form a loop. I find a 4-chain loop is easier to tighten later without snapping the yarn, so it’s a better fit for chenille yarns like the ones I’m using.

• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)
• 4th round: *2 sc, inc* 8 times (32 sts)
• 5th round: *3 sc, inc* 8 times (40 sts)
• Rounds 6 – 23: Sc all the way round
• 24th round: 3 dec, sc 8, 6 dec, 8 sc, 3 dec (28 sts)
• 25th round: 3 dec, sc 2, 6 dec, 2 sc, 3 dec (16 sts)

Put a stitch marker into the loop on your hook, and cut your yarn leaving a 24 inch tail. Set the body aside for now, and get the rest of your parrot parts ready.

The wings

The wings are worked from the tip, up to the shoulder. So start with your blue yarn and a magic circle or 4-ch loop to start.

• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: *Sc 1, inc* 4 times (12 sts)
• 3rd round: *Sc 2, inc* 4 times (16 sts)
• 4th round: *Sc 3, inc* 4 times (20 sts)
• 5th round: Sc all the way round

• 6th round: Change color to yellow

Changing color smoothly

The simplest way to make a color change in crochet is simply to drop the yarn you’ve been using so far, and pick up with a new one. If that’s what you’re most comfortable with doing here, then go ahead – this is your project! But I do invite you to try this technique for a smoother, less zigzag-y line where two colors meet. It takes a little practice to keep the tension in the stitches even, but I think it’s well with the effort.

For every stitch in round 6, make the first half of the stitch (the ‘legs’) with blue yarn, and the second half of the stitch (the top loops) in yellow. To do that:

1. Insert the hook into the first stitch of the round and draw through a loop of blue yarn (first picture below).
2. Put your yellow yarn over the hook and pull it through both blue loops (second picture below). That’s your first stitch done!
3. Insert the hook into the next stitch, and pull through a loop of blue yarn again (third picture below).
4. Then put your yellow yarn back over the hook, and draw it through both loops on the hook (fourth picture below).

Repeat steps 3 and 4 until you reach the end of the round, then cut the blue yarn and knot the end to the beginning of the yellow yarn.

Finishing the wing

• 7th round: Sc all the way round in yellow.
• 8th round: Change color to red.
• 9th & 10th rounds: Sc all the way round in red.
• 11th round: *Sc 3, dec* 4 times (16 sts)
• 12th round: *Sc 2, dec* 4 times (12 sts)

Slip stitch once, cut the yarn leaving a long tail for sewing later, and pull the yarn end right through the slip stitch. Repeat again from the beginning to make a second wing, and set them both aside for now.

The eyes

Scarlet macaws have black pupils and very pale yellow or gray pupils. They also have featherless areas of white skin around their eyes. I’ve captured the impression of that by making white circles to sit behind the safety eyes on my squishy parrot. They’re made in one simple round:

Beak time!

All macaw species have strong, curved beaks for tearing up leaves, breaking into nutshells, and crushing up fruit and seeds. Scarlet macaws have a white maxillary (top) beak, and a black mandibular (bottom) beak. This was a tricky result to achieve, so I’ve adopted a little creative license, and made the whole beak in gray. I think it ties in well with the gray toes later as well, and keeps the finished look of the parrot clean and cohesive.

Now, thread the yarn tail onto your darning needle and wiggle it up through the stitches to the tip of the beak (left below). Turn the beak round, make sure the yarn tail is looped through one of the stitches at the tip, and thread it back the same way you came (center below). Finally, pull the yarn tail so the underside side of the beak is squished into a shorter space, and the top of the beak is longer and curved.

Fluffy yarns like mine will hold this shape until I come to sew the beak onto the face. But smoother yarns might need knotting to prevent them springing open again.

Assembling your parrot

Now all your pieces are ready to put together, it’s time to bring your parrot to life!

Start by positioning the eyes on the body. Spread the body out flat in front of you, with the opening at the bottom running from left to right. The stems of the safety eyes go through the body about 8 stitches apart, between rows 10 and 11. The gap between the whites of the eyes should be about 5 stitches, or just larger than the width of the beak. When you’re happy with the position of the eyes, reach inside the body and press backs on until they click.

Now I think it’s always best to stuff amigurumi toys before sewing down any flat parts, so that the stitches don’t tug when the body is stretched out. So fill and close the body before sewing down the whites of the eyes.

Filling and closing the body

Stuff the body firmly with toy stuffing, then pick up your crochet hook again and use the yarn tail to make one more round:

• 26th round: 8 dec (8 sts)

Make a slip stitch and pull the yarn tail all the way through. Thread it onto a darning needle, and close the remaining 8 stitches with mattress stitch through the front loops only. Now use the yarn tails on the eyes to sew the edges down against the body.

Here’s how my parrot looked with the eyes attached to the empty body (left), after I’d filled and closed the body (center), and once the edges of the eyes were sewn down (right).

Sew on the beak next, so the top is about level with the center of the eyes.

Then use the yarn tails on the wings to join them to the sides of the body. The top of the wings should be about level with the top of the whites of the eyes, which for me is at round 9 on the body. To tie off the yarn tails, thread them both out through the back of the body, in the same place. Then knot them together, trim them short, and poke the knot back inside the body. You can see here, I’ve included the yarn tail from the beak as well:

And when we turn it over, the parrot is pretty close to being done:

Embroidering the feet

Birds’ feet are a tricky business in amigurumi. Some crocheters do make 3-dimensional ones from lightweight yarn. But it’s a formidable task! Other people use wire or pipe cleaners instead, which is effective if your bird is definitely just going to be an ornament. And still other people just add something to give the idea of feet. That’s the approach I’m taking here (and it’s the same approach I took in my squishy owl pattern).

I’ve embroidered the toes using the same gray yarn I used for the beak, doubled up. The tip of each toe is two stitches apart from its neighbor, and the tops of the toes on each foot all meet in the same place, roughly below the inside edge of the eye.

I dealt with the yarn tails in the same way as for the wings and beak, by feeding them out through the back of the body and knotting them together. The stuffing anchors the knot in place so the stitched stay put.

Squishy amigurumi parrot complete!

And that’s all there is to it! We don’t have a cocktail bar in our house (which is probably pretty normal) but I’m tempted to set up a cocktail making station for the summer, just so my parrot can sit among the paper umbrellas and bottles of rum, looking kitsch and amazing. And eventually she’ll fly off to my daughter’s room, to be another much-loved cuddly toy. And maybe I’ll try making this pattern in some other colorways. Did someone say lovebirds?

Happy crocheting!

The post Squishy Crochet Parrot Pattern appeared first on Lucy Kate Crochet.

Hello and welcome to my squishy crochet cow pattern! If you’re new to crochet, or if like me you find the legs are enough to put you off other amigurumi cow patterns, then this is the project for you.

The result is cute and cuddly, but unmistakeably bovine. The pattern uses only simple crochet terms, and the size and pattern can be easily adapted to make a cow plush that’s a complete one-off.

Materials

To make your own squishy cow you’ll need:

• White yarn. I’ve used King Cole yummy yarn, which is a super bulky chenille.
• Black or brown yarn for the markings. This needs to be the same weight as the yarn for the body – I’ve used King Cole Yummy yarn again.
• Pink and light brown yarns for the muzzle and horns. These also needs to be the same weight as your other yarns – I’ve used Hobbii toucan yarn in light pink, and Cygnet jellybaby yarn in teddy bear.
• A crochet hook. To achieve a tight fabric that doesn’t allow the stuffing to peek through, use a hook one size smaller than the yarn wrapper recommends.
• Safety eyes. See notes on size, below.
• Toy stuffing.
• Darning needle.

You can choose any weight or fiber of yarn you like. Plush chenille yarns like I’ve used are especially cuddly, but tweed and boucle yarns are really attractive alternatives. The pattern works with any weight of yarn, but obviously the size of your cow will change according to what you choose.

• DK yarns make a cow roughly 4 inches tall.
• Worsted yarns make a cow roughly 5 inches tall.
• Bulky yarns make a cow about 6 inches tall.
• Super bulky yarns make a cow about 7 inches tall (like Marigold).
• And jumbo yarns produce a cow 8 inches tall or higher (jumbo is a bit of a catch all category for all sorts of mammoth options!)

NB. These are all rough estimates, and don’t include the horns!

Pattern notes

This pattern is written in standard U.S. crochet terms. The only stitches you need to be familiar with are:

Ch chain
Sl st slip stitch
Sc single crochet
Hdc half double crochet
Dc double crochet
Inc increase (make two single crochet in the same space)
Dec decrease

For your decreases, use the invisible decrease method: insert the hook into the front loop only of the next two stitches (fig. 1 below). Yarn over and draw through both (two loops remaining on hook), yarn over again and draw through remaining two loops (fig. 2 below).

Squishy crochet cow pattern

Your bouncy bovine is going to come together in several parts:

• Body
• Ears
• Horns
• Muzzle
• Patches

It’s quite the list, but each part taken by itself is very simple, so they add up quickly! You can start each one with either a magic circle or by making 4 chains and joining them in a loop with a slip stitch. Each piece is then made in spiraling rounds, so count the stitches in each round carefully or use a stitch marker to keep track of where the round ends.

Body

For a cow with patches (like mine, pictured throughout) make the body entirely in white yarn. For a striped cow, click here for pattern notes about color changes.

• Make a magic circle, or ch 4 and sl st to join.
• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)
• 4th round: *2 sc, inc* 8 times (32 sts)
• 5th round: *3 sc, inc* 8 times (40 sts)
• Rounds 6 – 23: Sc all the way round
• 24th round: 3 dec, sc 8, 6 dec, 8 sc, 3 dec (28 sts)
• 25th round: 3 dec, sc 2, 6 dec, 2 sc, 3 dec (16 sts)
• Put a stitch marker into the loop on your hook, and cut your yarn leaving a 24 inch tail.

Ears

Make two – I’ve gone for one black and one white, but you can make them to match if you prefer!

• Make a magic circle, or ch 4 and sl st into the furthest chain from the hook to form a loop.
• 1st round: Ch 1, sc 8 into the 4-ch loop (8 sts)
• 2nd round: Sc all the way round (8 sts)
• 3rd round: *1 sc, inc* 4 times (12 sts)
• 4th & 5th rounds: Sc all the way round (12 sts)
• 6th round: *2 sc, inc* 4 times (16 sts)
• 7th round: Sc all the way round (16 sts)
• Slip stitch, skip 6 stitches, and slip stitch again, so the base of the ear folds round. Cut the yarn leaving a tail for sewing later, and pull the end right through the last slip stitch.

Horns

Make two in your light brown yarn.

• Make a magic circle, or ch 4 and sl st into the furthest chain from the hook to form a loop.
• 1st round: Ch 1, sc 6 into the 4-ch loop (6 sts)
• 2nd round: Sc all the way round (6 sts)
• 3rd round: *Sc 2, inc* twice (8 sts)
• Sl st, cut the yarn leaving a tail for sewing later, and pull the end right through the last slip stitch. Stuff each horn with a little toy stuffing.

Muzzle

Make one, using your light pink yarn.

• Make a magic circle, or ch 4 and sl st to join.
• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *Sc 2, inc* twice, sc 4, *inc, sc 2* twice (24 sts)
• 4th round: Sc 19, sl st.

Cut the yarn, leaving a long tail for sewing, and pull the tail right through the final slip stitch.

Patches

For me, the most fun part of developing this pattern was casting aside the rules of pattern and symmetry that are normally important in amigurumi, and experimenting with some freeform shapes for Marigold’s patches. Each patch starts with a regular circle, and finishes with an outer round that combines long and short stitches to give a wobbly edge. You don’t have to position those wobbles in exactly the same ways I did – the only thing you must remember is to increase the size of the last round by 8 stitches, so your patches remain flat!

To read these patterns, when a pair of stitches is in brackets, it means you make them in the same space – in other words, they replace a regular increase.

1st patch

• Make a magic circle, or ch 4 and sl st to join.
• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: Sc, (hdc, dc), dc, (hdc, sc), sc, inc, sc, (sc, hdc), *dc, (dc 2)* twice, hdc, inc, sc, inc (24 sts).
• Sl st, cut the yarn, leaving a long tail for sewing, and pull the tail right through the final stitch.

2nd patch

Another way to make a patch which isn’t an unnaturally perfect circle is to leave your final round incomplete:

• Make a magic circle, or ch 4 and sl st to join.
• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)
• 4th round (incomplete): Hdc, dc, (dc 2), dc, hdc, inc, sc 2, (sc, hdc), dc 2, (dc, hdc), sc 2, inc
• Sl st, cut the yarn, leaving a long tail for sewing, and pull the tail right through the final stitch.

3rd patch

• Make a magic circle, or ch 4 and sl st to join.
• 1st round: Ch 1, sc 8 into the magic circle or 4-ch loop (8 sts)
• 2nd round: 8 inc (16 sts)
• 3rd round: *1 sc, inc* 8 times (24 sts)
• 4th round: *2 sc, inc* 8 times (32 sts)
• 5th round (incomplete): Sc 3, (hdc, dc), dc2, hdc, inc, sc, hdc, dc, (dc 2), dc 2, hdc, inc, sc 2, hdc, (dc 2), dc 2, hdc, inc

Don’t fancy patches?

If patches don’t appeal to you, then you can leave them off – but my 10 year old daughter thinks this makes the pattern look more like a goat! Another alternative is to make your cow’s body with stripes. Three alternating stripes of black and white would resemble these beautiful Belted Galloway cattle I was lucky to encounter on a recent hike:

To achieve this look, start the body in black or brown yarn, switch to white at the start of round 10, and back to black or brown at the start of round 19.

Assembling your cow

Now you have a substantial pile of cow parts in front of you, it’s time to bring them to life! Start by laying the body out flat in front of you, with the opening at the bottom running from left to right. Position the eyes about 8 stitches apart, between rows 11 and 12.

Attaching the ears and horns

Next sew the ears onto the sides of the head, so that the bottom edge of the join is about level with the top of the eye. Join the horns to the top of the head slightly forwards of the ears, and directly above the eyes. For the ears and horns, I find the easiest thing to do is sew round the join, then feed the yarn tail out through the back of the body. When you’ve joined the second ear/horn, feed the yarn tail out through the same spot. Knot them together, trim the ends, and poke the knot back inside the body. The stuffing will anchor it in place.

Position the muzzle in front of you with the yarn tail towards your body. Use some black yarn to add nostrils – I’ve used the same black yarn I used for the ear and patches, but doubled up. Each nostril is a single stitch, and the yarn ends are tied together inside the muzzle. Then hold the muzzle in position against the body so that the yarn tail faces downwards, and the top of the muzzle sits about level with the tops of the eyes. Sew ¾ of the way round the edge, then poke some stuffing inside before you close the remaining gap.

Eyelashes

Cows are famous for their fluttering long lashes, and I think our squishy deserves some too! Adding them is easy – cut a length of yarn about three times the width of your cow’s body. Tie a loose overhand knot in the center, and tighten it around the stem of the eye.

Use a darning needle to thread each end of the yarn right through the body, so they come out through the same spot – as with the ears and horns. Tie them together, trim the ends, and tuck the knot inside the body.

Sewing on the patches

Finally, arrange the patches and sew them in place. There are no rules here – this is the moment to make your cow completely one-of-a-kind.

Squishy crochet cow summary

I’ve really enjoyed coming up with an amigurumi interpretation of a cow without the fiddly legs. I think the results are pretty cute! For a more lifelike take on a crochet cow, take a look at Lucy’s shaggy highland cow, and Texas longhorn cow patterns. I love the how much possibility there is in crochet for such different interpretations of the same idea! If you’re on social media, we’d love to see how your own cow turns out – you can tag Lucy in a photo on Facebook or Instagram. Happy crocheting!

There’s more!

Don’t miss these other gorgeous squishy animal patterns!

• Squishy crochet duck
• Squishy crochet chick

The post Squishy Crochet Cow Pattern appeared first on Lucy Kate Crochet.